Products

This is the smallest wireless earpiece in the world. Perfect for any occasion and easy to use. How to use If necessary, wear the skin color loop on your neck or under your clothes. Connect the plug to your cell phone slot and talk into the microphone normally and hands free. 

1)  How to wear the earpiece? Clean and dry your ears thoroughly right before use. Wear the loop set and connect to devices correctly, turn the cell phone volume down. Put your ear  to the sky. Carefully release the earpiece, let it fall into your ear canal.  Slowly turn up the volume, and it is working. 

2) How to take the earpiece out? After useing, don`t forget to take the earpiece out with the magnet.

3) does it need power? This earpiece dose not  need power to work, but the loop transmitter needs batteries. After using, you¡¯better removed the batteries. 

Usually wearing one earpiece is enough to get clear sound. If needed, wearing two earpieces in two ears to improve.

Function Description: 

1. 1) Power on: Press and hold the button for more than 3 seconds and release. The blue light will turn on for 1 second and the voice message will be: power on; 

2) Shut down: Press and hold the button for more than 3 seconds and release, the voice message will be: power off; 

3) Charging: The red light turns on and turns off automatically when fully charged. 

2 .1) Headset pairing: Enter pairing: press the button 3 times within 2 seconds, the blue light will flash and the voice will say: pair start; (the headset will be powered on again and the battery will be installed. It will pair automatically in the first 10 seconds. One beep in 1 second means the pairing is successful) 

2) Exit pairing: Press the button three times within 2 seconds, the blue light will turn off, and the voice will say: pair stop; (press the button once, and the headset will hear the voice) 

3. Check the battery: Press the button once, and the voice message will be: high/media/low battery; 

4. Set the headphone volume: Press the button twice in succession, and the voice loop will report: high/media/low volume; 

5. Whitelist setting and clearing. Only one phone number whitelist can be set. If not set, all calls will be answered automatically. 

1) Add a whitelist: During a call or incoming call, long press the button for >3 seconds, the phone number will be set to the whitelist and the system will automatically restart. Voice prompt "ok while list" .

2) Clear the whitelist: During a call or incoming call, press and hold the button for >3 seconds to clear the whitelist and automatically restart the system. Voice prompt "no while list" .

6. Turn on Mini box, the system will automatically prompt the above status by voice.

Instruction of System : 

a. Turn on the mic, press and hold the button for 5 seconds until the LED flashes. 

b. The mobile phone Bluetooth is connected to the Bluetooth broadcast name "bt1". If the connection is successful, the LED will automatically turn off; 

c. Insert the earphones into the battery, with the small end facing inward and the large end facing the case cover. 

d. Listen to music through the earphones, and the mic can automatically answer incoming calls and make calls.

Please note: Be sure to connect the phone to the Mic first, and then install the battery into the headset. If the order is reversed, the other party will not be able to hear our voice. 

Instruction of Microphone: 

a. Power on: Press and hold the button for 5 seconds, the voice prompts "power on" until the LED flashes, waiting for connection. 

b. Shut down: Press and hold the button for 5 seconds, the voice prompts "power off". After 5 minutes of no connection, it will automatically shut down. 

c. Mobile phone Bluetooth connection/disconnection: Voice prompts "connected"/"disconnected". 

d. Hang up an incoming call: Press the button for 1 second during a call to hang up. Incoming calls will be answered automatically by default. 

Instruction of Earpiece: 

a. Turn on: install the battery; 

b. Listen to music (when the MIC is connected to the mobile phone) (if it is used alone, the headset needs to be connected to Bluetooth bt1); 

Instruction of Charger: 

a. Push the battery into the battery compartment: the small end of the battery is facing down and the big end is facing up (as shown in the picture). 

b. Plug in the micro USB cable and the LED flashes, indicating charging. 

c. After full, the LED will automatically turn off. 

d. Push out the battery from the inside of the battery compa.

Advantages：  

Simple and stable: can be directly connected to the mobile phone, no Box required, no connection required. 

Good concealment: the mic can be hidden on the wrist or neckline, picks up sound with high sensitivity, and can whisper. 

The GSM BOX can be customized to replace the mobile phone. 

Long distance, 5m can penetrate walls. 

Microphone: 

1 ) Size: 20*15*8mm 

2) Distance from phone to Microphone : 7 meters , Open area: 20 meters 

3) Across wall: Yes 

4) Working time: 12+ hours 

5) Stand by time: 300+ days 

Earpiece: 

1) Size: 6 mm 

2) Distance from phone to Microphone : 7 meters , Open area: 20 meters 

3) Across wall: Yes 

4) Working time: 2.5 hours 

5) Stand by time: 30+ hours 

Battery Charger: 

Size: 20*15*8mm 

recharging current: 10mA/4.2V 

Package includes: 

1*earpiece , 1*microphone , 2* lir640 rechargeable, 1*battery charge