Instruction of System

Instruction of System : 

a. Turn on the mic, press and hold the button for 5 seconds until the LED flashes. 

b. The mobile phone Bluetooth is connected to the Bluetooth broadcast name "bt1". If the connection is successful, the LED will automatically turn off; 

c. Insert the earphones into the battery, with the small end facing inward and the large end facing the case cover. 

d. Listen to music through the earphones, and the mic can automatically answer incoming calls and make calls.

Please note: Be sure to connect the phone to the Mic first, and then install the battery into the headset. If the order is reversed, the other party will not be able to hear our voice. 

Instruction of Microphone: 

a. Power on: Press and hold the button for 5 seconds, the voice prompts "power on" until the LED flashes, waiting for connection. 

b. Shut down: Press and hold the button for 5 seconds, the voice prompts "power off". After 5 minutes of no connection, it will automatically shut down. 

c. Mobile phone Bluetooth connection/disconnection: Voice prompts "connected"/"disconnected". 

d. Hang up an incoming call: Press the button for 1 second during a call to hang up. Incoming calls will be answered automatically by default. 

Instruction of Earpiece: 

a. Turn on: install the battery; 

b. Listen to music (when the MIC is connected to the mobile phone) (if it is used alone, the headset needs to be connected to Bluetooth bt1); 

Instruction of Charger: 

a. Push the battery into the battery compartment: the small end of the battery is facing down and the big end is facing up (as shown in the picture). 

b. Plug in the micro USB cable and the LED flashes, indicating charging. 

c. After full, the LED will automatically turn off. 

d. Push out the battery from the inside of the battery compa.